Velocity–Time Graphs: Slope, Area and Signs
Read acceleration from slope and displacement from signed area, then use absolute area to find distance.
One graph, three questions
Check the axes first: time t in seconds horizontally, velocity v in m/s vertically. The following rules belong to a velocity–time graph; do not transfer its area rule to a position–time graph.
Consider a piecewise-linear graph. Velocity stays at +4 m/s from 0 to 3 s, then decreases linearly to −4 m/s at 7 s. It crosses zero at 5 s.
| Interval | Slope / acceleration | Signed area / displacement |
|---|---|---|
| 0–3 s | 0 | +12 m |
| 3–5 s | −2 m/s² | +4 m |
| 5–7 s | −2 m/s² | −4 m |
Total displacement is 12+4−4=12 m. Distance is 12+4+4=20 m. Average velocity is 12/7 m/s; average speed is 20/7 m/s.
A negative sign does not always mean slowing
Acceleration is negative throughout the second segment. Speed decreases from 3 to 5 s, when velocity is positive, then increases from 5 to 7 s, when velocity is negative. Below the time axis means motion in the negative direction, not negative distance. Graph height gives velocity, not acceleration. A horizontal line may represent steady motion at a nonzero speed.
At the ideal corner at 3 s, the slopes on either side differ. There is no unique derivative there; the table reports acceleration inside each segment.
Check with units
Slope has units (m/s)/s=m/s². Area has units (m/s)×s=m. To find distance, split at every zero crossing and add the absolute areas.
For 3–7 s alone, displacement is zero but distance is 8 m. The object moves forward and then backward.