Filtration, Crystallisation, Distillation or Extraction?

Choose a separation method from the property that differs: insolubility, crystallization behavior, volatility or distribution between phases.

Illustration: Filtration, Crystallisation, Distillation or Extraction?

Can a filter remove dissolved salt from water?

Ordinary filtration separates insoluble solid particles from fluid. It does not automatically retain dissolved ions. Filtering sand mixed with salt water can remove sand, but does not directly yield pure water. Match the method to an actual property difference.

MethodMain basisCommon mistake
FiltrationInsoluble particles versus fluidTreating dissolved solute as residue
CrystallizationConditions for crystal formation and solubilityAssuming mother liquor has no solute left
DistillationVolatility differencesAssuming one pass always produces a pure substance
Liquid–liquid extractionDistribution between two immiscible liquid phasesAssuming complete transfer in one extraction

The target changes the choice

For a paper model containing only insoluble sand, water and dissolved salt, filtration addresses sand removal. Recovering salt suggests an appropriate crystallization process. Collecting water calls for considering distillation, not treating evaporated but uncollected water as recovered product. Stability, purity requirements and equipment also matter; this is not an operating procedure.

Extraction requires suitable phases and distribution behavior. An organic layer is not always uppermost: density determines position. Preferential solubility does not mean all solute transfers. Distillation performance depends on phase behavior, not a universal boiling-point-gap shortcut.

Complete the sentence: “Because the target differs in ___, consider ___.” If you cannot name the property, do not choose by method name alone.

For layer position, compare the densities of the two solution phases rather than assuming that every organic layer is uppermost.