CSCA Intervals: Endpoints, Intersections, Unions and Complements

Work through intersections, unions and complements with explicit endpoint tests, a stated universal set and interval examples.

Illustration: CSCA Intervals: Endpoints, Intersections, Unions and Complements

The most expensive mistake may be one endpoint

An intersection requires both conditions to hold. A union requires at least one. Parentheses exclude a finite endpoint; square brackets include it. Infinity is not a real number that an interval can contain as an endpoint, so an infinite end uses a parenthesis.

Careful endpoint checks make these operations reliable.

Finish one example completely

Let A=[−2,3)A=[-2,3) and B=(1,5]B=(1,5].

OperationResultEndpoint check
A∩BA\cap B(1,3)(1,3)1 is absent from B and 3 is absent from A
A∪BA\cup B[−2,5][-2,5]The intervals overlap; their outer endpoints are included

The number 2 satisfies both original conditions. The number 1 belongs to A but not B, while 3 belongs to B but not A. Testing these values exposes an error that a rough picture can hide: overlapping length alone does not decide whether a boundary is included.

A complement needs a universal set

With U=RU=\mathbb R, the complement of A is (−∞,−2)∪[3,+∞)(-\infty,-2)\cup[3,+\infty). The number -2 is already in A and must be excluded; 3 is absent from A and must be included in its complement.

Change the universal set to U=[−4,6]U=[-4,6]. The complement is now [−4,−2)∪[3,6][-4,-2)\cup[3,6]. A complement means “in U but not in A”, rather than automatically extending indefinitely in both directions. State U before applying the operation.

What happens at a single touching point?

For C=[0,2]C=[0,2] and D=(2,4]D=(2,4], the intersection is empty: 2 is the only possible common boundary, but D excludes it. Their union is nevertheless [0,4][0,4], because C includes 2 and there is no missing point between the intervals.

If C changes to [0,2)[0,2), both intervals exclude 2. The intersection remains empty, but the union must remain in two pieces: [0,2)∪(2,4][0,2)\cup(2,4]. Replacing it with [0,4][0,4] would insert a number allowed by neither original interval.

Before submitting an answer

  • Have I used “both” for intersection and “at least one” for union?
  • Have I tested every finite boundary in the original conditions?
  • Have I stated the universal set for a complement?
  • Is there really a gap between any separate pieces?
  • Have I distinguished the empty set from a one-element set such as {2}\{2\}?

Use a diagram to organise the work, then let the conditions decide the result. Testing an interior point, an exterior point and each boundary is a stronger check than judging the thickness of a line in a sketch.